|
1982 Isuzu I-Mark Catalytic Converter EPA Approved
(MagnaFlow Exhaust Products Direct-Fit Standard Grade Federal 23651 New MagnaFlow EPA Approved Direct Fit Standard Grade Catalytic Converter)

Low Inventory – Order Soon.
This is a MagnaFlow Exhaust Products Catalytic Converter EPA Approved (Note: New MagnaFlow EPA Approved Direct Fit Standard Grade Catalytic Converter). This Catalytic Converter EPA Approved is guaranteed to fit your 1982 Isuzu I-Mark . SKU number 45-47154-1A
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23651. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1985-1988 Chevrolet Spectrum, 1981-1989 Isuzu I-Mark, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Body Type - Spun, Clamps Included - No, Finish - Stainless Steel, Universal Or Specific Fit - Specific, Grade Type - Regular, Tube Material - Stainless Steel, Hangers Included - No, Inlet Type - Bolt-On, Outlet Type - Bolt-On, Heat Shield Attached - Yes, Body Material - Stainless Steel, California Air Resources Board (CARB) Certified - No, Substrate Material - Ceramic, Inlet Gasket Included - Yes, Inlet Mounting Hardware Included - No, Outlet Gasket Included - Yes, Outlet Mounting Hardware Included - No, Overall Length - 13.25 in., Air Tube Count - 0, Sensor Port Count - 0, Heat Shield Material - Aluminized Steel, Air Tube Adaptable - No, CARB Executive Order Number - Not Applicable, Prop 65 Y/N - No, Series - Standard Grade
| Specification | Description |
| Part Type | Catalytic Converter EPA Approved |
| SKU | 45-47154 1A |
| Brand | MagnaFlow Exhaust Products |
| Series | Direct-Fit Standard Grade Federal |
| Part Number | 23651 |
| Type | New MagnaFlow EPA Approved Direct Fit Standard Grade Catalytic Converter |
| Condition | New |
| Fit Type | EXACT |
| Warranty | FREE 5 Year Unlimited Mileage Warranty More Information |
| Additional warranty options available.* View Options
5 Year
Unlimited Mileage Warranty
FREE
5 Year Extended Unlimited Mileage Warranty $22.20
Lifetime Unlimited Mileage Warranty $37.00
| |
| Weight | 6 Pounds |
| Box Dimensions |
Height: 4.50" Length: 17.75" Width: 7.00" |
| UPC | 841380008831 |
1987 Chevrolet Spectrum 1.5L - Rear
1988 Chevrolet Spectrum 1.5L - Rear
1987 Chevrolet Spectrum 1.5L - Turbocharged
Click Here for Full List
- 1988 Chevrolet Spectrum 1.5L - Turbocharged
- 1985 Chevrolet Spectrum 1.5L Eng.
- 1986 Chevrolet Spectrum 1.5L Eng.
- 1989 Geo Spectrum 1.5L - Rear
- 1987 Isuzu I-Mark 1.5L - Rear
- 1988 Isuzu I-Mark 1.5L - Rear
- 1989 Isuzu I-Mark 1.5L - Rear
- 1985 Isuzu I-Mark 1.5L Eng.
- 1986 Isuzu I-Mark 1.5L Eng.
- 1981 Isuzu I-Mark 1.8L - GAS
- 1983 Isuzu I-Mark 1.8L - GAS
- 1984 Isuzu I-Mark 1.8L - GAS
- 1985 Isuzu I-Mark 1.8L - GAS
Interchange Part Numbers















More Information








