|
1987 Subaru Standard Catalytic Converter CARB Approved
(MagnaFlow Exhaust Products Direct-Fit Standard Grade Federal (Exc. CA) 23869 New MagnaFlow EPA Approved Direct Fit Standard Grade Catalytic Converter)

Low Inventory – Order Soon.
This is a MagnaFlow Exhaust Products Catalytic Converter CARB Approved (Note: New MagnaFlow EPA Approved Direct Fit Standard Grade Catalytic Converter). This Catalytic Converter CARB Approved is guaranteed to fit your 1987 Subaru Standard . SKU number 45-37320-1A
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23869. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Material - Stainless Steel, Body Type - Clam-Shell, Clamps Included - No, Finish - Stainless, Universal Or Specific Fit - Specific, Grade Type - Regular, Tube Material - Stainless Steel, Hangers Included - Yes, Inlet Type - Flange, Outlet Type - Flange, Heat Shield Attached - Yes, Body Material - Stainless Steel, California Air Resources Board (CARB) Certified - No, Substrate Material - Ceramic, Inlet Gasket Included - Yes, Inlet Mounting Hardware Included - No, Outlet Gasket Included - Yes, Outlet Mounting Hardware Included - No, Overall Length - 44.25 in., Air Tube Count - 0, Sensor Port Count - 1, New York Certified - No, Heat Shield Material - Aluminized Steel, Oxygen Sensor Location - Pre Converter, Air Tube Adaptable - No, CARB Executive Order Number - Not Applicable, Prop 65 Y/N - No
| Specification | Description |
| Part Type | Catalytic Converter CARB Approved |
| SKU | 45-37320 1A |
| Brand | MagnaFlow Exhaust Products |
| Series | Direct-Fit Standard Grade Federal (Exc. CA) |
| Part Number | 23869 |
| Type | New MagnaFlow EPA Approved Direct Fit Standard Grade Catalytic Converter |
| Condition | New |
| Fit Type | Exact |
| Warranty | FREE 5 Year Unlimited Mileage Warranty More Information |
| Additional warranty options available.* View Options
5 Year
Unlimited Mileage Warranty
FREE
5 Year Extended Unlimited Mileage Warranty $64.20
Lifetime Unlimited Mileage Warranty $107.00
| |
| Weight | 35 Pounds |
| Box Dimensions |
Height: 7.50" Length: 48.25" Width: 21.75" |
| UPC | 841380009296 |
1983 Subaru DL 1.6L Engine - Front
1984 Subaru DL 1.6L Engine - Front
1987 Subaru DL 1.8L Engine - CARB - Front
Click Here for Full List
- 1985 Subaru DL 1.8L Engine - Front
- 1986 Subaru DL 1.8L Engine - Front
- 1985 Subaru GL 1.8L Engine - CARB - Naturally Aspirated - Front
- 1988 Subaru GL 1.8L Engine - CARB - Naturally Aspirated - Front
- 1989 Subaru GL 1.8L Engine - CARB - Naturally Aspirated - Front
- 1986 Subaru GL 1.8L Engine - Naturally Aspirated - Front
- 1987 Subaru GL 1.8L Engine - Naturally Aspirated - Front
Interchange Part Numbers















More Information








