|
2008 Mazda Tribute Catalytic Converter EPA Approved
(MagnaFlow Exhaust Products Manifold w/ Integrated Catalytic Converter HM Grade Federal 50811 New MagnaFlow EPA Approved Direct Fit Exhaust Manifold w/ Integrated HM Grade Catalytic Converter)

Low Inventory – Order Soon.
This is a MagnaFlow Exhaust Products Catalytic Converter EPA Approved (Note: New MagnaFlow EPA Approved Direct Fit Exhaust Manifold w/ Integrated HM Grade Catalytic Converter). This Catalytic Converter EPA Approved is guaranteed to fit your 2008 Mazda Tribute . SKU number 45-44020-Z4
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Manifold Catalytic Converter 50811. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 50811 includes (2) Flange Gaskets and interchanges with OE parts AJ05-20-55XF, AJ27-20-55X, AJ38-20-55X, AJ38-20-55XA, AJ38-20-55XB, AJ50-20-55X. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Material - Stainless Steel, Converter Tube Material - Stainless Steel, Clamps Included - No, Finish - Uncoated, Type - One-Piece, Grade Type - Regular, Converter Body Length - 8.5 in., Inlet Type - Flange, Outlet Type - Flange, Heat Shield Attached - No, California Air Resources Board (CARB) Certified - No, Substrate Material - Ceramic, Inlet Gasket Included - Yes, Inlet Mounting Hardware Included - No, Outlet Gasket Included - Yes, Outlet Mounting Hardware Included - Yes, Overall Length - 13.5 in., Sensor Port Count - 1, Converter Body Material - Stainless Steel, New York Certified - No, Body Type - Clam Shell, CARB Executive Order Number - Not Applicable, Prop 65 Y/N - No
| Specification | Description |
| Part Type | Catalytic Converter EPA Approved |
| SKU | 45-44020 Z4 |
| Brand | MagnaFlow Exhaust Products |
| Series | Manifold w/ Integrated Catalytic Converter HM Grade Federal |
| Part Number | 50811 |
| Type | New MagnaFlow EPA Approved Direct Fit Exhaust Manifold w/ Integrated HM Grade Catalytic Converter |
| Condition | New |
| Fit Type | EXACT |
| Warranty | FREE 5 Year Unlimited Mileage Warranty More Information |
| Additional warranty options available.* View Options
5 Year
Unlimited Mileage Warranty
FREE
5 Year Extended Unlimited Mileage Warranty $148.95
Lifetime Unlimited Mileage Warranty $248.25
| |
| Weight | 8 Pounds |
| Box Dimensions |
Height: 7.25" Length: 16.75" Width: 12.13" |
| UPC | 841380043924 |
2001 Ford Escape 3.0L - From 10/15/01 - Rear
2002 Ford Escape 3.0L - Rear
2003 Ford Escape 3.0L - Rear
Click Here for Full List
- 2004 Ford Escape 3.0L - Rear
- 2005 Ford Escape 3.0L - Rear
- 2006 Ford Escape 3.0L - Rear
- 2007 Ford Escape 3.0L - Rear
- 2008 Ford Escape 3.0L - Rear
- 2001 Mazda Tribute 3.0L - Rear
- 2002 Mazda Tribute 3.0L - Rear
- 2003 Mazda Tribute 3.0L - Rear
- 2004 Mazda Tribute 3.0L - Rear
- 2005 Mazda Tribute 3.0L - Rear
- 2006 Mazda Tribute 3.0L - Rear
- 2005 Mercury Mariner 3.0L - Rear
- 2006 Mercury Mariner 3.0L - Rear
- 2007 Mercury Mariner 3.0L - Rear
- 2008 Mercury Mariner 3.0L - Rear
Interchange Part Numbers















More Information








