|
2012 Ford Flex Catalytic Converter EPA Approved
(MagnaFlow Exhaust Products Direct-Fit OEM GRADE Federal (Exc.CA) 52232 New MagnaFlow EPA Approved Direct Fit OEM Grade Catalytic Converter)

Low Inventory – Order Soon.
This is a MagnaFlow Exhaust Products Catalytic Converter EPA Approved (Note: New MagnaFlow EPA Approved Direct Fit OEM Grade Catalytic Converter). This Catalytic Converter EPA Approved is guaranteed to fit your 2012 Ford Flex . SKU number 45-46522-Z7
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52232. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 52232 includes (1) Flat Ring Gasket and interchanges with OE parts BT4Z-5E212-B, BT4Z-5E212-C. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Material - Stainless Steel, Body Type - Spun, Clamps Included - No, Finish - Stainless, Universal Or Specific Fit - Specific, Grade Type - Regular, Tube Material - Stainless Steel, Hangers Included - No, Inlet Type - Flange, Outlet Type - Flange, Heat Shield Attached - No, Body Material - Stainless Steel, California Air Resources Board (CARB) Certified - No, Substrate Material - Ceramic, Inlet Gasket Included - Yes, Inlet Mounting Hardware Included - No, Outlet Gasket Included - No, Outlet Mounting Hardware Included - No, Overall Length - 12.375 in., Air Tube Count - 0, Sensor Port Count - 1, New York Certified - No, Oxygen Sensor Location - Midbed, Air Tube Adaptable - No, CARB Executive Order Number - Not Applicable, Prop 65 Y/N - No
| Specification | Description |
| Part Type | Catalytic Converter EPA Approved |
| SKU | 45-46522 Z7 |
| Brand | MagnaFlow Exhaust Products |
| Series | Direct-Fit OEM GRADE Federal (Exc.CA) |
| Part Number | 52232 |
| Type | New MagnaFlow EPA Approved Direct Fit OEM Grade Catalytic Converter |
| Condition | New |
| Fit Type | EXACT |
| Warranty | FREE 5 Year Unlimited Mileage Warranty More Information |
| Additional warranty options available.* View Options
5 Year
Unlimited Mileage Warranty
FREE
5 Year Extended Unlimited Mileage Warranty $108.75
Lifetime Unlimited Mileage Warranty $181.25
| |
| Weight | 6 Pounds |
| Box Dimensions |
Height: 5.50" Length: 21.25" Width: 8.75" |
| UPC | 888563063447 |
2011 Ford Edge 3.5L - Front Rearward
2012 Ford Edge 3.5L - Front Rearward
2013 Ford Edge 3.5L - Front Rearward
Click Here for Full List
- 2014 Ford Edge 3.5L - Front Rearward
- 2011 Ford Edge 3.7L - Front Rearward
- 2012 Ford Edge 3.7L - Front Rearward
- 2013 Ford Edge 3.7L - Front Rearward
- 2014 Ford Edge 3.7L - Front Rearward
- 2011 Ford Explorer 3.5L - Front Rearward
- 2012 Ford Explorer 3.5L - Front Rearward
- 2010 Ford Flex 3.5L Engine - Naturally Aspirated - From Prod. Date 3/9/2010 - Rear
- 2011 Ford Flex 3.5L Engine - Naturally Aspirated - Front Rearward
- 2011 Lincoln MKS 3.7L Eng. - Front Rearward
- 2012 Lincoln MKS 3.7L Eng. - Front Rearward
- 2011 Lincoln MKT 3.7L Eng. - Front Rearward
- 2012 Lincoln MKT 3.7L Eng. - Front Rearward
- 2010 Lincoln MKT 3.7L Engine - Rear
- 2011 Lincoln MKX 3.7L - Front Rearward
- 2012 Lincoln MKX 3.7L - Front Rearward
- 2013 Lincoln MKX 3.7L - Front Rearward
- 2014 Lincoln MKX 3.7L - Front Rearward
- 2015 Lincoln MKX 3.7L Engine - Rear
Interchange Part Numbers















More Information








