BuyAutoParts New A/C Compressor

Thank you for your inquiry. The A/C compressor on this listing fits the 2001 Chevy Blazer S-10 model, which is an SUV. Per the part number you provided (15068284) we show our part number 60-00971 (which you may look at by clicking on this link) to be the correct compressor for the 2001 Chevy S-10 Pick-up truck.

Thank you for your inquiry. The compressor on this listing fits the 1999 Chevy Silverado as long as it is equipped with the HT6 compressor. Per our catalog it looks like the 4.8L takes the HU6 compressor but you would want to check with your dealer or the original unit to be sure.

Here is the link for the kit that contains the O-rings for your vehicle. https://www.buyautoparts.com/buynow/1999/Chevrolet/S10_Truck/A-C_Compressor_and_Components_Kit/60-82421_CK?src=pla

Every compressor we sell will have some oil inside to protect the part during shipping and the time it spends on our shelf, but you would need to drain it and add fresh oil prior to installation. If you can provide your vehicle information, we can look up the exact type and amount of oil and refrigerant required. Your vehicle should also have a label under the hood with that information as well.

Does your van have a second set of AC controls and vents for passengers in the back, or a complete roof-mounted auxiliary AC unit added by the conversion company? If it's the first one, we have a complete AC kit for all 1999-2002 Chevy Express and GMC Savana, regardless of engine option, with or without rear AC, available here:

https://www.buyautoparts.com/buynow/60-80436_RK

If you have a roof-mounted AC unit, we can look up any part numbers off that compressor to see if they match anything we have available.

We have a guide on how to check if your truck has a Denso 10S20 or Delphi HU6 compressor available here:

https://www.buyautoparts.com/blog/need-a-new-ac-compressor-for-your-1999-2002-chevy-silverado-or-gmc-sierra-read-this-first/

On that generation of GM trucks and SUVs, some models have a pressure sensor on the rear head of the original compressor. If yours does, you would need to remove that sensor and swap it over to your new compressor. If you have any trouble with that, send us a direct email via the link below and we can send you a new sensor!

https://www.buyautoparts.com/contactus.htm

Thank you for your inquiry. The 1 wire is (+) the old has a common(-).