BuyAutoParts Remanufactured Power Steering Gear Box

Thank you for your inquiry. The input is 13/16" and the output is 1.250".

Thank you for your inquiry. Pitman arm and rag joint will need to be changed. The specs will be different. We do sell complete conversion kits that include the pitman and rag joint but we currently don’t catalog it online. Please give us a call at 888-907-7225 so we may better assist you.

We have a few different options for that; search for part number 82-70018. There's a few different options there, but they will all fit like OEM on a vehicle that had manual steering from the factory. Pay attention to the two-letter suffix after 82-70018. R is a remanufactured (by us) stock replacement, QR is a quick ratio version of that, BX is remanufactured by Borgeson, and BQ is a quick-ratio version of the Borgeson reman.

No, quick ratio steering gearboxes have the same range of motion, they just require less input.

Yes, all our steering gearboxes have a one year, unlimited mileage warranty.

Yes, this gearbox (82-00278) fits all 1964-1976 Cutlass with factory power steering.

What exact vehicle do you have? We can check to see if we have a gearbox available with 3 mounting bolts.

This gearbox (82-00278) has 32 splines with a flat spot on the input shaft, and 32 splines with 4 master splines on the output. It fits all 1964-1976 Chevelle with factory power steering.

For this applications, we have a few different steering ratio options available. All of these are fixed-ratio.

Stock replacement: about 4 turns lock-to-lock: http://buyautoparts.com/buynow/82-00278_AN

3.0 LTL: http://buyautoparts.com/buynow/82-00278_Q4

2.75 LTL: http://buyautoparts.com/buynow/82-00278_Q3

2.5 LTL: http://buyautoparts.com/buynow/82-00278_Q2

We do not currently have a complete kit for your vehicle listed on the site, but we have all the OEM parts available to put something together for you. Send us a direct email via the link below to set up a special order!

https://www.buyautoparts.com/contactus.htm

A quick-ratio steering gearbox means that the front wheels will turn more, using the same amount of steering input. The total range of motion is unaffected, so it's not like your wheels will turn any sharper. This is a common upgrade on older vehicles because a quick-ratio box will bolt up like OEM, but the steering response will be a little quicker, so the handling will be improved, especially if your original gearbox is worn-out.

Thank you for your inquiry. This item, just like most OEM parts, is manufactured in China.  Our parts are manufactured in some of the largest and most sophisticated OEM parts factories in the world – often the exact same facilities where the factory original part is manufactured.  This is how we can back our parts with the strongest warranties in the industry.

Thank you for your inquiry. This is a front steer.

Thank you for your inquiry. The input shaft is splined and grooved. It has 0.875 inches diameter with 31 spline count. While the ouput shaft is 0.864 inches diameter. The pressure port thread size is 11/16 - 18 and the return port thread size is 5/8 -18.