BuyAutoParts New Kits and Performance Parts

This gearbox (82-70032 BN/BX/ON/AN/R) is a stock replacement with the same steering ratio as OEM. We do have a brand new, quick-ratio version of the same gearbox; the part number is 82-70032 NQ.

This kit includes a quick-ratio gearbox with 4.5 turns lock-to-lock.

Yes it does. What exact vehicle do you have? We probably have a power steering conversion kit available that will also include the pump, hoses, brackets, and everything else required for the swap if you're interested!

This remanufactured gearbox (82-00278 R) has a $100 core deposit in addition to the purchase price, but it's fully refundable if you return your original gearbox. We cover return shipping for the core within the continental US (48 states). We also have a brand new version of this gearbox without any core deposit available here:

https://www.buyautoparts.com/buynow/82-00278_AN

That part number does not match anything we have available, but 82-70032 does have a 36-spline 3/4" input shaft, and it fits a ton of 1970's GM vehicles. This gearbox is pretty common for swaps, and is known as a Saginaw 505.

82-00278 is a steering gearbox, not a pump. 82-00278 AN is a brand new, stock replacement gearbox with no core deposit. 82-00278 R, Q2, Q3 and Q4 are remanufactured and will have a core deposit applied at checkout. The core deposit is fully refundable if you return your original gearbox to us, and we will include a prepaid return shipping label in the box.

We don't have a pre-boxed kit cataloged for your specific application, but we do carry replacements for cars that had power steering from the factory, and we can piece together a kit that includes all the OEM parts. Send us a direct email via the "Contact Us" link and we can set everything up for you!

Yes, this gearbox (82-00278) fits all 1964-1976 Chevelle with factory power steering. It's supposed to fit and feel just like OEM, but it will likely feel firmer and tighter than your worn-out original gearbox.

The input shaft is 0.8" in diameter, and has 31 splines. Don't have a spline count for the output shaft, but it's 1.25" in diameter.

We don't regularly carry a quick-ratio version of this gearbox, but if you send us a direct email via the "Contact Us" link, we can check with our rebuilder to see if that's something they can make so we can add it to our catalog.

New gearboxes do not require any core deposit, but remanufactured ones do. If you'd prefer to have your original gearbox rebuit by our pros, send us a direct email via the below link and we can get that set up!

https://www.buyautoparts.com/contactus.htm

It's very likely, but if you have any OEM part numbers off your original gearbox, we can try looking them up to make sure they match.

This gearbox fits just like OEM, so it'll fit either your original pitman arm or any other stock replacement. What exact vehicle do you have? We can check to see if we have a pitman arm available.

A quick-ratio steering gearbox means that the front wheels will turn more, using the same amount of steering input. The total range of motion is unaffected, so it's not like your wheels will turn any sharper. This is a common upgrade on older vehicles because a quick-ratio box will bolt up like OEM, but the steering response will be a little quicker, so the handling will be improved, especially if your original gearbox is worn-out.

This gearbox (82-70032R and 82-70032AN) is a stock replacement, with the same 24:1 steering ratio as OEM. We have a quick ratio 16:1 version available here:

https://www.buyautoparts.com/buynow/82-70032_NQ

82-70032 has a 3/4" 36 spline input shaft. The input shaft is fully splined, meaning there is no flat spot on the circumfrence of the shaft. We have a coupler that matches it available here:

https://www.buyautoparts.com/buynow/85-70003_N

This quick-ratio gearbox (82-70032 NQ) has a 16:1 steering ratio (about 4.5 turns lock-to-lock), versus 24:1 (6.5 LTL) for the original box.

Thank you for your inquiry. This item, just like most OEM parts, is manufactured in China.  Our parts are manufactured in some of the largest and most sophisticated OEM parts factories in the world – often the exact same facilities where the factory original part is manufactured.  This is how we can back our parts with the strongest warranties in the industry.

Thank you for your inquir. Here is the link for the pitman arm: 1968 Chevrolet Chevelle Pitman Arm Pitman Arm Power- 65-68 -Chevelle Nova - Big hole 85-80017 (buyautoparts.com) Here is the link for the coupling: BuyAutoParts 85-70001N - Buy Auto Parts

Thank you for your inquiry. Yes, this is a guaranteed fit for your 1962 Chevy II. 

Thank you for your inquiry. This is a front steer.

Thank you for your inquiry. The input shaft is splined and grooved. It has 0.875 inches diameter with 31 spline count. While the ouput shaft is 0.864 inches diameter. The pressure port thread size is 11/16 - 18 and the return port thread size is 5/8 -18.