|
1987 Toyota Celica Catalytic Converter EPA Approved
(MagnaFlow Exhaust Products Direct-Fit HM Grade Federal 50802 New MagnaFlow EPA Approved Direct Fit HM Grade Catalytic Converter)

Low Inventory – Order Soon.
This is a MagnaFlow Exhaust Products Catalytic Converter EPA Approved (Note: New MagnaFlow EPA Approved Direct Fit HM Grade Catalytic Converter). This Catalytic Converter EPA Approved is guaranteed to fit your 1987 Toyota Celica . SKU number 45-45147-Z6
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50802. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 50802 includes (1) O2 Port Plug, (2) Flat Ring Gaskets and interchanges with OE parts 25508-74020, 25508-74021, 25508-74022, 25508-74070, 25508-74080, 25508-74090, 25508-74100, 25508-74130, 25508-74140, 25508-74200. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Material - Stainless Steel, Body Type - Spun, Clamps Included - No, Finish - Stainless, Universal Or Specific Fit - Specific, Grade Type - Regular, Tube Material - Stainless Steel, Hangers Included - No, Inlet Type - Flange, Outlet Type - Flange, Heat Shield Attached - No, Body Material - Stainless Steel, California Air Resources Board (CARB) Certified - No, Substrate Material - Ceramic, Inlet Gasket Included - Yes, Inlet Mounting Hardware Included - No, Outlet Gasket Included - Yes, Outlet Mounting Hardware Included - No, Overall Length - 9.25 in., Air Tube Count - 0, Sensor Port Count - 2, New York Certified - Yes, Oxygen Sensor Location - Pre and Post Converter, Air Tube Adaptable - No, CARB Executive Order Number - Not Applicable, Prop 65 Y/N - No
| Specification | Description |
| Part Type | Catalytic Converter EPA Approved |
| SKU | 45-45147 Z6 |
| Brand | MagnaFlow Exhaust Products |
| Series | Direct-Fit HM Grade Federal |
| Part Number | 50802 |
| Type | New MagnaFlow EPA Approved Direct Fit HM Grade Catalytic Converter |
| Condition | New |
| Fit Type | EXACT |
| Warranty | FREE 5 Year Unlimited Mileage Warranty More Information |
| Additional warranty options available.* View Options
5 Year
Unlimited Mileage Warranty
FREE
5 Year Extended Unlimited Mileage Warranty $74.40
Lifetime Unlimited Mileage Warranty $124.00
| |
| Weight | 5 Pounds |
| Box Dimensions |
Height: 6.50" Length: 14.25" Width: 6.50" |
| UPC | 841380017406 |
1987 Toyota Camry 2.0L - Front
1988 Toyota Camry 2.0L - Front
1989 Toyota Camry 2.0L - Front
Click Here for Full List
- 1990 Toyota Camry 2.0L - Front
- 1991 Toyota Camry 2.0L - Front
- 1990 Toyota Celica 2.2L - Front
- 1991 Toyota Celica 2.2L - Front
- 1992 Toyota Celica 2.2L - Front
- 1993 Toyota Celica 2.2L - Front
- 1994 Toyota Celica 2.2L - Front
- 1995 Toyota Celica 2.2L - Front
- 1996 Toyota Celica 2.2L - Front
- 1997 Toyota Celica 2.2L - Front
- 1998 Toyota Celica 2.2L - Front
- 1999 Toyota Celica 2.2L - Front
- 1990 Toyota Celica 2.2L - w/ Fed Emissions
- 1991 Toyota Celica 2.2L - w/ Fed Emissions
- 1992 Toyota Celica 2.2L - w/ Fed Emissions
- 1993 Toyota Celica 2.2L - w/ Fed Emissions
- 1994 Toyota Celica 2.2L - w/ Fed Emissions
- 1988 Toyota Celica GT - 2.0L - Front
- 1989 Toyota Celica GT - 2.0L - Front
- 1987 Toyota Celica ST - 2.0L - Front
- 1988 Toyota Celica ST - 2.0L - Front
- 1989 Toyota Celica ST - 2.0L - Front
Interchange Part Numbers















More Information








