BuyAutoParts New Power Steering Gear Box

Yes, this gearbox (82-00278) fits all 1964-1976 Cutlass with factory power steering.

This gearbox (82-00278) has 32 splines with a flat spot on the input shaft, and 32 splines with 4 master splines on the output. It fits all 1964-1976 Chevelle with factory power steering.

This gearbox (82-00278) is only tested and verified to fit 1964-1972 Olds F85. If you have any OEM part numbers off your original gearbox, we can try looking them up to see if they match this or anything else we have available.

It does not; the gearbox itself fits a huge variety of vehicles, but they might each use a different rag joint or pitman arm. This gearbox will fit your original steering linkage, or any other stock replacements.

A quick-ratio steering gearbox means that the front wheels will turn more, using the same amount of steering input. The total range of motion is unaffected, so it's not like your wheels will turn any sharper. This is a common upgrade on older vehicles because a quick-ratio box will bolt up like OEM, but the steering response will be a little quicker, so the handling will be improved, especially if your original gearbox is worn-out.

No, this gearbox (82-00278) fits the larger Jeep SJ (Wagoneer, pickups, etc) but no CJ. We don't currently have any gearbox cataloged for a 1971 CJ with factory power steering, but if you have any casting numbers off your original part, we can try looking them up to see if they match this one we have available for 1972-79 models:

https://www.buyautoparts.com/buynow/82-00014

Thank you for your inquiry. This item, just like most OEM parts, is manufactured in China.  Our parts are manufactured in some of the largest and most sophisticated OEM parts factories in the world – often the exact same facilities where the factory original part is manufactured.  This is how we can back our parts with the strongest warranties in the industry.

No, this will not fit a 1977 Camaro. The correct quick ratio gearbox can be found here: BuyAutoParts 82-00068QR - Buy Auto Parts

Thank you for your inquiry. Yes this will fit your vehicle.

Thank you for your inquiry. This power steering gearbox Quick 14:1 ratio, 3 turns lock to lock. 

Thank you for your inquiry. Yes this will fit 1965 Oldsmobile F85 With Power Steering.

Thank you  for your inquiry. This is an exact fit for 1972 Chevrolet Chevelle Power Steering Model.

Thank you for your inquiry. Here is the parts that you need for the conversion: https://www.buyautoparts.com/buynow/1965/chevrolet/el_camino/power_steering_pressure_line_hose_assembly/o2-l0034_dxmp  ; https://www.buyautoparts.com/buynow/1965/chevrolet/el_camino/power_steering_pump/86-05970_an ; https://www.buyautoparts.com/buynow/1965/chevrolet/el_camino/power_steering_gear_box/82-00278_nq4 ; https://www.buyautoparts.com/buynow/1965/chevrolet/el_camino/power_steering_reservoir_hose/o4-g0012_dxmp ; https://www.buyautoparts.com/buynow/1965/chevrolet/el_camino/steering_coupler/85-70003_n

Thank you for your inquiry. This is intended for 1972 Chevrolet Vega with power steering from the factory. You need a mechanic that already done this conversion.

Thank you for your inquiry. This is a front steer.

Thank you for your inquiry. This is a Quick 14:1 ratio, 3 turns lock to lock steering gearbox. The stock replacement is 3.5 turns lock to lock.

Thank you for your inquiry. Yes, this will fit.

Thank you for your inquiry. The input shaft is splined and grooved. It has 0.875 inches diameter with 31 spline count. While the ouput shaft is 0.864 inches diameter. The pressure port thread size is 11/16 - 18 and the return port thread size is 5/8 -18. 

Thank you for your inquiry. Yes, this is a power steering gear box. Quick 14:1 ratio, 3 turns lock to lock. This will fit 1970 Chevrolet Chevelle Power Steering Model.

Thank you for your inquiry. The input shaft diameter is 0.8 inches with 32 splines. The output shaft diameter 1.25 inches with 32 splines.

Thank you for your inquiry. This has an OE casting and the uses the same inverted flair  OEM style housing.

Thank you for your inquiry. Unfortunately, that is not the correct part. Here is a link of the correct part: 1958 Oldsmobile Super 88 Power Steering Gear Box Power Steering - Inline Saginaw 82-01257 r (buyautoparts.com)

Thank you fro your inquiry. Fits select General Motors and American Motors cars from the 1960's and 1970's with factory-equipped power steering; check your exact vehicle information because it only fits certain models.

Thank you for your inquiry. Fits select General Motors and American Motors cars from the 1960's and 1970's with factory-equipped power steering; check your exact vehicle information because it only fits certain models.

Thank you for your inquiry. Yes, the stock pitman arm will fit this power steering gearbox.