We ship from multiple warehouses across the country, so you get your part as soon as possible.
Free, one year (or more), unlimited mileage warranty. Covers everything; parts and shipping costs
We have reviewed over 1,000,000 fitments to guarantee an exact fit for your vehicle.
Return for any reason within 60 days for a full refund
Experts in auto parts since 1989-We are rated 4.9/5 by over 400,000 of our customers.
2016 Chrysler 200 Rack and Pinion
(BuyAutoParts Rack and Pinion with Electric Power Steering 80-30190R Remanufactured)
This is a BuyAutoParts Rack and Pinion (Note: Remanufactured). This Rack and Pinion is guaranteed to fit your 2016 Chrysler 200 . SKU number 80-30190 R
BuyAutoParts.com has remanufactured our own power steering racks since opening in 1989 - this is the part that started it all! For the last 3 decades, we've remained committed to using only the highest quality components and the most intensive remanufacturing process in the industry. Each steering rack and pinion is remanufactured by hand in the USA, after it goes through a thorough inspection to original specifications. Each rack is then tested on a steering simulator to ensure the operation meets the specific requirements for the steering system of your vehicle. We stand behind our product with a 3 year, unlimited mileage warranty.
Our Inspection Process:
Our Assembly Process:
Our Testing Process:
Our Commitment to Quality and Customer Service:
Fits 2015-2017 Chrysler 200
PROCEDURE AFTER INSTALLING REPLACEMENT STEERING RACK; EPS VERIFICATION TEST 1. Turn the ignition off. 2. Remove all test equipment. NOTE: Make sure the Torque Sensor (Grey) harness connector is connected properly. 3. Connect all previously disconnected components and connectors. 4. Verify all accessories are turned off, the battery is fully charged and the charging system has a status of ""charged"". 5. Verify that the ignition is on. With the scan tool, record and erase all Diagnostic Trouble Codes (DTCs) from all modules. Start the engine and allow it to run for two minutes and fully operate the system that was indicating the failure. NOTE: Turn the steering wheel from stop to stop, holding at each stop position for One second. 6. Turn the ignition off and wait five minutes. Turn the ignition on and using the scan tool, read DTCs from all modules. 7. If there are no DTCs present after turning ignition on, road test the vehicle while turning the steering wheel from stop to stop for at least five minutes. 8. Again, with the scan tool read DTCs. If any DTCs are present, refer to the Table of Contents in the applicable section for the Diagnostic procedure and troubleshoot the new or recurring symptom. 9. If there are no DTCs present and the customer's concern can no longer be duplicated, the repair is complete.
Specification | Description |
Part Type | Rack and Pinion |
SKU | 80-30190 R |
Brand | BuyAutoParts |
Series | Rack and Pinion with Electric Power Steering |
Part Number | 80-30190R |
Type | Remanufactured |
Condition | Remanufactured |
Fit Type | EXACT |
Warranty | FREE 3 Year Unlimited Mileage Warranty More Information |
Additional warranty options available.* View Options
3 Year
Unlimited Mileage Warranty
FREE
5 Year Extended Unlimited Mileage Warranty $130.05
Lifetime Unlimited Mileage Warranty $216.75
| |
Weight | 47 Pounds |
Box Dimensions |
Height: 12.00" Length: 55.00" Width: 16.00" |
UPC | 193331224426 |
2015 Chrysler 200 All Models - with Electric Power Steering
2017 Chrysler 200 All Models - with Electric Power Steering
Interchange Part Numbers